Ordering a window frame section without its matching sash, interlock, bead or track can leave a fabricator with metal that cannot complete the opening. For an architectural aluminium profile order in Jaipur, start with the assembly and work back to the individual sections.
This guide helps fabricators, contractors and procurement teams organise that enquiry. Omalco's manufacturing base is in Behror, Rajasthan. Share the Jaipur delivery location and the complete profile requirement so the team can review catalogue options or a custom section.
At a glance
- Build a coordinated schedule of sections, hardware and opening references.
- Approve the intended material condition, finish reference and visible faces before production.
- Separate the fabricator's workshop requirement from the construction site's delivery sequence.
Start with a complete opening schedule
List each opening type and connect it to an approved drawing or system reference. Identify fixed frames, sliding or casement members, mullions, interlocks, glazing beads and other matching sections. Record the profile code and revision against each component so the supplier can check the intended combination.
Identify the responsible system designer or fabricator for compatibility and performance. An extrusion catalogue helps identify geometry, but the complete opening also depends on glazing, seals, drainage, hardware, fabrication and installation. Keep those decisions with the team approving the assembled system.
Check the interfaces before confirming a section
Mark the dimensions used by rollers, locks, hinges, screws, gaskets and glazing accessories. Send the relevant hardware references with the drawing. Where two profiles mate, ask the fabricator to review them as a pair, including the effect of the agreed surface treatment.
An existing die may be suitable, or the assembly may require a custom section. Ask the manufacturer to identify the proposed route and any changes needing approval. For a new section, agree a representative sample and assembly check before releasing a larger run.
Approve the architectural finish with a physical reference
State whether the order is mill finish, anodised, powder coated or another agreed finish. Identify the required colour, texture, visible surfaces and any surfaces requiring masking. Ask which organisation performs the treatment and what inspection evidence is included.
Use a physical finish reference suitable for the approval. Agree how visible marks, colour differences and handling damage are assessed. If the project will order material in phases, record how subsequent batches will be compared with that reference.
Turn opening quantities into a profile order
Translate the opening schedule into a quantity for every profile code. Record supplied lengths separately from the fabricator's cutting plan. Ask how nominal section weight, cut allowances and the intended optimisation affect the kilograms and pieces being ordered.
Keep any allowance for cutting waste or spares visible in the calculation. Confirm the commercial minimum for each profile and finish. This makes it easier to distinguish the project requirement from the minimum manufacturing or finishing batch.
Plan delivery around fabrication and installation
Specify whether the material is going to a Jaipur workshop or directly to a project site. Confirm vehicle access, unloading responsibility, storage space and surface protection. Label bundles so the receiving team can connect the contents to the approved profile schedule.
For staged requirements, agree quantities and dates for each release. Include the time needed for sample approval and finishing before promising installation dates. At receipt, record bundle identity, quantity, condition and any discrepancy against the order.
Frequently asked questions
Does Omalco have a manufacturing factory in Jaipur?
Omalco's manufacturing base is in Behror, Rajasthan. This guide is for buyers specifying profiles for Jaipur projects. State your receiving address when enquiring and confirm the delivery arrangement with the team.
Can I mix different window profile codes in one enquiry?
Yes. List each required code, length, quantity and finish separately. Ask the supplier to state any minimum quantity or setup charge for each section, and have your fabricator confirm that the selected members form a compatible assembly.
Should the extrusion manufacturer approve the complete window system?
Agree the scope explicitly. Profile manufacture is one part of the system. The appointed designer or fabricator should establish the complete opening specification, including glazing, hardware, fabrication, installation and any required testing or approvals.
Further technical reading
- Architectural aluminium profile families
- Doors and windows application guide
- Omalco technical resources
About the publisher
Omalco manufactures aluminium profiles and custom extrusions from its Behror base. Our journal helps buyers prepare technical enquiries and compare supply requirements. Learn about Omalco.
